Hot
-
If you don't know how to connect the equipment?中位机与下位机串口连接，两个口为并口，任取其一；下位机与下位机连接，也是任意其中一口一直往下扩展；只有一台中位机的时候，中位机上的网口与电脑网口相连，如有多台中位机的时候，中位机网口插入的网线，接入到交换机网口，或者是路由器的LAN口。
-
If you don't know how to use clamps?夹具线都有正负极线码管，可根据V＋，I+，V-，I-来接线。
-
The middle machine can be connected, but the lower machine can not be connected.The middle machine can be connected, but the lower machine can not be connected.
-
How to modify the repeated equipment number about 3008/ 4008 series?使用我司校准软件完成箱号修改内容。
-
If you find there's no channel display on software, when you connect the new equipment with the previous equipment in the same series. What should you do?新设备过去需要通过中位机重新搜索一下新到的设备，重新映射一次即可。
-
What is the computer configuration standard for software installation?CPU：i5处理器；内存：6至8G；硬盘：1T；最佳运行境：Win7，64位。新电脑要重新分区，保证系统盘以外的软件安装盘有400G以上空间.切记不要把软件安装在系统盘上。分区可网上下载”分区助手”，经费允许的情况下尽量配置品牌机，如联想，戴尔，惠普等大品牌，协调性能好，质量有保障。
-
After automatic disconnection, you find it automatic connection again.检查下电脑到交换机及设备间的网络连接是否正常。
-
Software installation is not successful. And it is also not uninstalled yet. What's more, it remind us that the window installer package is damaged.系统确认补丁，后期建议补丁文件加载到客户端安装包。
-
The server is blocked by antivirus software. And how to repair it?建议关闭杀毒软件。
-
Can we control 3008 equipment and 4008 equipment in the same computer and the same software?可以统一使用BTS8.0客户端。
-
You are prompted IP conflict or IP occupied when you set IP.可配合按键与液晶屏设定IP地址。
-
If ther are 10 equipments mapping, there are only 8 equipments display.客户端默认1*8映射方式，可以更改客户端配置文件选择1*16。
日本語
